Color grading tools
Match Chart
Correct your camera's colour from a 24-patch colour chart in the shot. Drag four corners onto the chart and the photo or clip is corrected to its published colours.
Match Chart Pro corrects a camera's colour from a colour chart in the shot. You put the chart's corners on it, Luttie reads all 24 patches and works out the correction that brings them to the chart's published colours, and the whole photo or clip gets that correction before any look goes on.
Use it when colour has to be right, not just pleasing: product shots, skin that has to match across cameras, or footage from two cameras that should cut together.
Which charts work
The 24-patch ColorChecker Classic layout: four rows of six patches, natural colours on top and six greys along the bottom. That's the X-Rite or Calibrite ColorChecker Classic, the Classic target on the ColorChecker Passport, and the Mini. Charts with other colours, such as the SpyderCheckr, won't read correctly.
Luttie compares against the values X-Rite published for cards made before November 2014. Cards made since then differ by under 1 ΔE on average and about 2 on the white patch, which is smaller than most lighting errors.
A printed chart works only as well as the print. You can print one from the ColorChecker chart page, but a home printer's colours drift, so a real card is better for anything that matters.
Using it
- Open the photo or clip with the chart in it.
- In Basic Correction, under Color Chart, press Match chart. Four corners and 24 dots appear on the photo.
- Drag each corner onto the outer corner of a corner patch, the edge of the coloured area and not the card's black frame. Drag inside the outline to move the whole chart. Every dot should sit inside a patch.
- The photo corrects itself as you drag, and the panel shows how far off the chart was and how far off it is now, as ΔE (under 2 is hard to see, over 5 is an obvious shift).
- Press Done, or Enter. Cancel or Esc puts back what was there before.
The chart can be any way up; Luttie tries all four and keeps the one that fits. It can be at an angle too, since the corners follow the perspective.
Without Pro you can place the chart and watch the correction. Keeping it asks you to upgrade. A match saved with an edit stays with it, and applies once you have Pro.
To change it later, press Adjust. Remove takes it off.
Getting a good reading
- Light the chart evenly, the way the subject is lit. A shadow across part of it, or glare on the patches, reads as a colour problem and gets "corrected" into the whole picture.
- Fill a reasonable part of the frame with it. Each patch is averaged over the middle of the square, so a few pixels per patch is noisy.
- Don't let the white patch clip. If it's pure white in the shot, the correction can't know how bright it really was.
- Shoot it at the same settings and in the same light as the footage you're correcting. A correction is for one camera in one light.
Log footage
Match Chart expects Rec.709 or sRGB, the way a normal photo or clip looks. For log footage, convert it first with a Color Space Transform in the Camera panel: the chart is read after the conversion, so the correction fits the converted picture.
What it changes
It works out one of two corrections and keeps whichever is more accurate:
- a matrix: exposure, white balance and how the camera mixes its colours, in one step;
- a tone correction: white balance from the grey patches, a tone curve read off the grey row, then a matrix. This suits cameras with their own contrast curve.
If the chart was already closer to the reference than either could get it, nothing is applied and the panel says so. A correction never makes the chart worse.
The correction runs as its own stage in the node graph, straight after the Color Space Transform and before everything else, so looks and adjustments sit on top of a corrected camera. Turn the stage off there to compare. The ΔE shown is measured on the picture as the editor draws it at its default settings.
A match belongs to the camera and the light, not the look, so it isn't part of a saved look.