RED Log3G10 LUTs — 11 Rec.709 LUTs for RED & Nikon ZR
11 65-point .cube LUTs for RED Log3G10 in REDWideGamutRGB: a Rec.709 conversion, a neutral, four looks and five film stock looks, each converting and grading in one file. For KOMODO, V-RAPTOR and the Nikon ZR's R3D NE.
What's inside · 11 files
Measured from the files themselves. Tint is the hue each end of the range is pushed toward; saturation is the average change across the whole frame.
| Look | Shadows | Highlights | Saturation |
|---|---|---|---|
| Rec.709 Conversion | neutral | neutral | +30.7% |
| Neutral Rec.709 | neutral | neutral | +29.8% |
| Warm Cinematic | neutral | 60° yellow | +30.2% |
| Cool Moody | 218° blue | neutral | +23.4% |
| High Contrast | neutral | neutral | +29.6% |
| Faded Film | neutral | neutral | +10.2% |
| Film: Portrait 400 · Scan | neutral | neutral | +30.6% |
| Film: Tungsten 500 · Cinema Print | 205° blue | neutral | +26.8% |
| Film: Daylight 250 · Cinema Print | 204° blue | neutral | +26.0% |
| Film: Soft 500 · Soft Print | neutral | 67° yellow | +12.3% |
| Film: Vivid 100 · Scan | neutral | neutral | +30.7% |
How to use them
- 01Buy the pack and download the .cube files (one .zip).
- 02Import them in your editor. Guides below for each app.
- 03Want it on your own footage first? Try it on your photo above, or open it in the Luttie editor.
About the RED Log3G10 LUTs
Log3G10 holds RED's whole range and shows you none of it. R3D comes out of the decode flat and grey. These are conversion LUTs: each one decodes RED's Log3G10 curve and REDWideGamutRGB to Rec.709 and applies a look in the same file, so one LUT on the clip gets you from flat to finished.
Eleven files, yours to keep for one payment, and they work anywhere .cube works.
Every file is 65-point: 274,625 colour samples instead of the 35,937 in a standard 33-point LUT. A log conversion is the steepest curve a LUT carries, which is where a sparse grid shows up as banding in skies and skin. 65 points is the largest size DaVinci Resolve exports. The download also has a 33-point copy of every file, for cameras, monitors and apps that load nothing larger.
What's inside
Rec.709 Conversion: the technical one. A Log3G10 to Rec.709 conversion, curve and REDWideGamutRGB, built from RED's published IPP2 white paper, with a soft shoulder so highlights don't clip. Build your own grade on top.
Neutral Rec.709: the conversion with a touch of contrast and colour, the minimum to look right straight away. Start here if you're unsure.
Warm Cinematic: warmed mids, teal pushed into the shadows, skin held through the warmth. The default "this looks like a film" answer.
Cool Moody: cooled and deepened, with skin protected so faces don't go blue along with everything else. Overcast, interiors, night exteriors.
High Contrast: the punchiest here. Crushed blacks and lifted saturation for anything that needs to cut through on a phone screen.
Faded Film: matte blacks and reduced saturation, the softest look in the set.
Which one should you use?
If you plan to grade afterwards, use the Rec.709 Conversion and build on top of it, or Neutral Rec.709 for a head start. If you want to be done, pick by the light: warm and sunlit wants Warm Cinematic, grey and overcast wants Cool Moody, and anything destined for social wants High Contrast.
How to use them
Download the pack. Every look is a separate
.cubefile.Decode the R3D to REDWideGamutRGB and Log3G10. In DaVinci Resolve that's the clip's Camera RAW settings, with RED's IPP2 colour science; REDCINE-X PRO and Premiere Pro's RED source settings have the same two options.
Put one LUT on the clip. Don't add RED's own Rec.709 output transform as well: these already contain the conversion, and stacking two is the most common way this goes wrong.
Set exposure and white balance in the RAW settings first, where R3D lets you change them losslessly.
Which cameras is this for?
Anything that gives you Log3G10 in REDWideGamutRGB: R3D from the KOMODO, KOMODO-X, V-RAPTOR and V-RAPTOR X and the DSMC2 bodies under IPP2, ProRes a RED records in Log3G10, and the Nikon ZR's R3D NE. The ZR's N-Log is a different curve, with its own pack.
Exposing Log3G10
Log3G10 puts 18% grey a third of the way up the curve and holds about ten stops above it, so there's room to expose a little brighter for cleaner shadows and let the conversion bring it back down.
Film stock looks
Five more files, built with Luttie's film engine. Like the rest of the pack they go straight onto Log3G10: each one decodes Log3G10 and REDWideGamutRGB, then develops the image through a film stock.
- Portrait 400 · Scan — inspired by Kodak Portra 400, scanned: soft contrast, warm skin, pastel highlights.
- Tungsten 500 · Cinema Print — inspired by Kodak Vision3 500T, through a print inspired by Kodak 2383: night and interiors, clean cool shadows, dense blacks.
- Daylight 250 · Cinema Print — inspired by Kodak Vision3 250D, through the same cinema print: neutral daylight colour with a projected-film finish.
- Soft 500 · Soft Print — inspired by Fuji Eterna 500, through a gentler print inspired by Fuji 3513DI: muted colour, soft contrast.
- Vivid 100 · Scan — inspired by Kodak Ektar 100, scanned: saturated, punchy colour.
Luttie's film stocks are its own, shaped after published data about the films named. They aren't measured copies, and Luttie isn't affiliated with Kodak, Fujifilm, RED or Nikon. To adjust one, set the same stock and source in the film engine and export your own.
Make them yours
Every look here is a starting point. Load one in the Luttie editor, set its Source to RED Log3G10, adjust it, and export your own .cube.
More LUTs
Blackmagic Gen 5 to Rec.709 LUT — Free Film Conversion for BMPCC
A free 65-point .cube LUT that converts Blackmagic Film Gen 5 (Pocket 4K, 6K, 6K Pro, ProRes or BRAW) to Rec.709. No look, no sign-up, free for commercial work.
View →Nikon N-Log LUT Pack — 11 Conversion LUTs for N-Log
Pro11 65-point Nikon N-Log to Rec.709 .cube LUTs that convert and grade in one file: a conversion, a neutral, four looks and five film stock looks. For the Z6, Z7, Z8, Z9 and Zf.
11 LUTs →BMPCC 4K LUTs — Blackmagic Pocket 4K & 6K Film Gen 5 to Rec.709
Pro11 65-point .cube LUTs for the Blackmagic Pocket Cinema Camera 4K, 6K and 6K Pro in Film Gen 5: a Rec.709 conversion, five looks and five film stock looks, each converting and grading in one file.
11 LUTs →Canon C-Log3 LUT Pack — 15 Conversion LUTs for Canon Log 3
Pro11 65-point Canon C-Log3 .cube LUTs that convert and grade in one file: a Rec.709 conversion, a neutral, four looks and five film stock looks. For the R5, R6, R7, R8, C70 and C400.
15 LUTs →