Shooting Log3G10?
RED Log3G10 LUTs
11 Rec.709 LUTs for RED & Nikon ZR
RED's IPP2 decodes R3D to Log3G10 in REDWideGamutRGB, the flat picture you grade from, and the Nikon ZR's R3D NE decodes the same way. The Luttie editor decodes Log3G10 too: set the film engine's Source to RED Log3G10 for free, or use the Camera panel's RED LUTs with Pro. The Luttie RED pack has 11 downloadable 65-point .cube files, each converting to Rec.709 and grading in one.
KOMODO · KOMODO-X · V-RAPTOR · V-RAPTOR X · Nikon ZR
A conversion only fits the log it was made for, so find your camera first.
R3D, decoded to Log3G10
RED Log3G10 LUTs →KOMODO · KOMODO-X · V-RAPTOR · V-RAPTOR X · DSMC2 bodies (IPP2)
Set REDWideGamutRGB and Log3G10 in the RAW settings, then one LUT on top.
R3D NE, decoded to Log3G10
RED Log3G10 LUTs →Nikon ZR
The same decode settings as any R3D. These files fit it as they are.
Nikon ZR
Nikon's own log curve on the ZR, which needs the N-Log files instead.
Log footage is recorded flat on purpose: it holds highlight and shadow detail far outside what a display can show. A look LUT does not expand that range, so applied straight to log the image stays washed out and the highlights stay dead. Convert to Rec.709 first, then grade on top. Technical transform, then look, in that order.
Decode to Log3G10
In the clip's RAW settings, with RED's IPP2 colour science, set the colour space to REDWideGamutRGB and the gamma to Log3G10. Resolve, REDCINE-X PRO and Premiere Pro all have both options.
Set exposure and white balance in RAW
R3D changes them losslessly before the decode, which is cleaner than correcting after the LUT.
Apply one LUT
Each file contains the Log3G10 to Rec.709 conversion. Don't add RED's own Rec.709 output transform as well.
Grade on top
Contrast, secondaries and skin go above the conversion, never below it.
11 65-point .cube LUTs for RED Log3G10 in REDWideGamutRGB: a Rec.709 conversion, a neutral, four looks and five film stock looks, each converting and grading in one file. For KOMODO, V-RAPTOR and the Nikon ZR's R3D NE.
Yes, for R3D NE. The ZR's R3D NE files decode to Log3G10 in REDWideGamutRGB like any R3D, so set those in the RAW settings and put one of these on top. The ZR's N-Log is a different curve, with its own Nikon N-Log pack.
No. Nikon's free RED LUTs, made with RED in 2024, expect N-Log footage. These expect Log3G10, which is what R3D NE decodes to.
The current one, which RED's IPP2 white paper describes and today's Resolve and REDCINE-X PRO use: 18% grey a third of the way up the curve. A very early beta version from 2016 differs slightly.
No. Each file contains the conversion. Putting RED's Rec.709 output transform under one of these converts the footage twice.
If the camera recorded ProRes in Log3G10 with REDWideGamutRGB, these work as they are. ProRes recorded with a Rec.709 look already baked in doesn't need a conversion.
Other cameras